🌟 The PERGOLUX S2 Skydance is our premium freestanding pergola model, combining structural strength, built‑in lighting, and luxury aesthetics. It features the highest weather resistance of all PERGOLUX models, along with enhanced durability and a sleek, sound‑insulated louver system.
Key Features
- Motorized Operation
Remote‑controlled louvers (9.6″ wide, box‑shaped) offer smooth adjustment for shade and airflow. - Integrated Lighting
Built‑in warm white LEDs are embedded inside the louvers. Operated via the same remote as the motor. - Premium Construction
6″×6″ posts, taller beams, and thicker framing provide a robust and upscale appearance. - Superior Weather Ratings
Wind resistance up to 100 MPH; snow load capacity 25–31 lbs/ft² (up to 63 lbs/ft² possible depending on setup). - Sound Dampening
Double‑walled, box‑shaped louvers reduce rain noise for a more comfortable experience.
Note: The built-in lighting means the Skydance is not compatible with PERGOLUX LED light kits.
Sizes & Weights
| Size | Approx. Weight |
| 10′×10′ | 620 lbs |
| 10′×13′ | 840 lbs |
| 13′×13′ | 865 lbs |
| 13′×19′ | 1,290 lbs |
General Dimensions
- Height: 9′ (vs. 8.25′ for Sundream)
- Post Size: 6″×6″
- Base Plate: 8.5″
- Louver Width: 9.6″, box‑shaped
The Skydance is available only in freestanding configurations.
Material Properties
- Material: Aluminum 6063‑T5
- Yield Strength (Fy): 18.9 ksi
- Ultimate Strength (Fu): 25.4 ksi
- Elastic Modulus: 10,100 ksi
- Shear Modulus: 3,800 ksi
- Unit Weight: 159.1 pcf
- Flexural Strength: 5,398 lbs/ft
- Poisson’s Ratio: 0.33
Weather Performance
Wind Load
- Withstands up to 100 MPH
Snow Load
| Size | No Walls | With Walls |
| 10′×10′ | 31 lbs/ft² | — |
| 10′×13′ | 31 lbs/ft² | — |
| 13′×13′ | 25 lbs/ft² | 25 lbs/ft² |
| 13′×19′ | 25 lbs/ft² | — |
California Use: Designed for 20 PSF ground snow loads per ASCE 7‑16 (2022 CBC/CRC compliant).
Installation & Compatibility
- Foundation (Recommended): 33″×33″×3″ concrete footings for optimal anchorage
- Fasteners: M8/M10 anchors, 6″ length minimum
- Patio Slope: Up to 2% acceptable without modification
Compatible Accessories
- Heaters: 1500 W, IPX5-rated
- Screens: Lengths: 10′–19′, Height: 7.7′
- Glass Walls:
- Framed: 8 mm (100 lbs/panel)
- Frameless: 10 mm (120 lbs/panel)
- Guide Rail Height: 1.6″
- Wood Slat Walls: 48 slats per wall, installed using 10″ screws and ½″ spacers
- Everglow Lantern
Note: Accessories require drilling into structure using self‑tapping screws. Skydance does not use SnapFit tracks.
Manual Operation Option
- Optional hand‑crank motor available for $300
- Only one motor (manual or electric) can be installed at a time
- Swapping motors is straightforward
Differences from Other PERGOLUX Models
| Feature | Skydance S2 | Sundream S2 | Pergola S2 |
| Louver Width | 9.6″ (box‑shaped) | 6.3″ (double‑walled) | 6.3″ (single‑walled) |
| Lighting | Built‑in warm white | Not included (kit-compatible) | Not included (kit‑compatible) |
| Structure | 6″ posts, 8.5″ base | 5″ posts, 6″ base | 4.3″ posts, 6″ base |
| Installation | Freestanding only | Freestanding or wall‑mounted | Freestanding or wall‑mounted |
| Accessory Mounting | Drilling required | SnapFit track system | SnapFit track system |
| Price | Highest | Mid‑range | Entry level |
S3 Smart Upgrade
- Kit Includes:
S3 motor, Matter controller, remote, and cabling - Features After Upgrade:
Bluetooth app, 20% stronger motor, Matter smart home support (Alexa, Google, Siri) - Installation:
Simple swap of motor, control box, and remote
Troubleshooting & Common Issues
| Issue | Solution |
| Motor keeps spinning | Remount correctly; motor should stop when resistance is detected |
| Motor makes screeching/grinding noise | Install washer or add bushing on motor arm |
| Motor slides but doesn’t open louvers | Check and re‑mount motor as per manual |
| Control box dead | Check power supply, wiring; replace if necessary |
| Control box sparks / LEDs flicker | Grounding issue or internal short — replace control box |
| LED dimming or color errors | Check wiring sequence; may need control box replacement |
| Beam threads missing | Use rivnuts (provided) or request professional installer |
| Access panel hits louver | Remove louver bolt from guide rail |
| Screen off‑track | Re‑insert rubber with flat tool carefully |
| Screen side gap | Normal — referenced in manual |
| Glass panels overlap | Normal — ensures wind/water resistance |
Remote Control Details
- Battery Type: CR2450 (3 V Lithium)
- Signal Range:
- Up to 197 ft in open air
- Around 98 ft with obstacles
- Frequency: 433 MHz
For installation guides, manuals, and accessory details, visit pergolux.app or contact our customer service team—we’re happy to answer any questions you might have! 😊